Editing SimTX Guide/Receiving (section)

== Receive a signal ==
[[File:SimTX Guide Receiving receive tab.png|thumb|center|800px|alt=Receive tab with My station selected, Receive at Demo hilltop, the Roof Yagi antenna and its rotator, center frequency 14.2 MHz, sample rate 250000, and a running bridge Hilltop 20 m on 127.0.0.1:1234.|The Receive tab receiving at Demo hilltop, with one bridge running.]]
# Under '''Where you listen''', choose where the receiver is.
# Under '''Tuning''', set the '''Center frequency''' and the '''Sample rate (Hz)'''.
# Press '''Start RX'''.
# In your SDR program, connect an rtl_tcp source to the address shown under '''Bridge''', by default <code>127.0.0.1:1234</code>.

[[How to receive]] shows the settings in SDR++, and [[Guide to setting up sdr console with simtx|the SDR Console guide]] in SDR Console.