Transmission Sources
The transmission source determines what audio or signal the transmitter sends. It is selected in the Transmission Source section of the Transmitter Interface.
Source types[edit | edit source]
| Source | Description |
|---|---|
| Audio File | Plays an audio file. Supported formats: wav, mp3, aiff, aif, au. Files are resampled to 48 kHz. Files can be selected with Choose... or dragged onto the window. |
| Microphone | Transmits live audio from a selected input device. The device list appears when this source is chosen. Availability depends on the operating system audio setup. |
| White Noise | Generates broadband noise. Useful for testing receivers and observing the occupied bandwidth. |
| PipeWire | Streams the system audio (mono) on Linux systems with PipeWire. Only shown when PipeWire is available. |
| PipeWire Stereo | Streams system audio in stereo, intended for WFM broadcasting. Selecting it forces the WFM mode. Only shown when PipeWire is available. |
| GNU Radio IQ | Receives complex IQ samples from GNU Radio over a local TCP connection. The Tone field becomes IQ Port (suggested port 7355). Point a GNU Radio TCP sink at 127.0.0.1 on that port. The source sample rate equals the requested bandwidth. Selecting it forces the IQ mode. |
Audio gain[edit | edit source]
The Audio Gain field (default 0.9) scales the source level before modulation. Driving it high increases loudness but pushes the transmitter into compression and distortion, especially with presets that have little headroom, see Radio Presets.